Rob
Can you provide the necessary joints and tie rods to complete this task?
JC
Rob
Can you provide the necessary joints and tie rods to complete this task?
JC
[quote]Rob
Can you provide the necessary joints and tie rods to complete this task?
JC[/quote]
Is your rear end playing up then?
[quote]Is your rear end playing up then?
[/quote]
Its all the curries he eats with martyn… :lol: :lol: :lol:
John Give me a call.
Been asked by a few pwople now to develop a kit of parts.
Cheers Rob
:lol:
You guys should really get more sunlight :lol:
JC
I can’t afford the phonecall :shock:
I’ll speak to you at JAE :lol:
JC
i am also up for doing this
Its all the curries he eats with martyn… :lol: :lol: :lol:
John Give me a call.
Been asked by a few pwople now to develop a kit of parts.
Cheers Rob[/quote]
Hi Rob,
Did you develop a kit for this?
If so, do you have any details
Cheers
Chooch
I bought the bits from Mitsi, I think all the bits cost arounf £75.00.
Then fabricated and welded the brackets onto the subframe, made a blanking plug for the diff, waxoyled everything while I was there and removed all the pipework.
It’s really not a difficult job, you can do it without disconnecting the rear struts which is a bonus, check your Diff bushes while you are there (you will need to remove them anyway.
JC
[quote]I bought the bits from Mitsi, I think all the bits cost arounf £75.00.
Then fabricated and welded the brackets onto the subframe, made a blanking plug for the diff, waxoyled everything while I was there and removed all the pipework.
It’s really not a difficult job, you can do it without disconnecting the rear struts which is a bonus, check your Diff bushes while you are there (you will need to remove them anyway.
JC[/quote]
Hi JC,
That certainly seems like less hastle than getting the rack re-conditioned. Have you noticed a difference in handling ablility? I’m guess it’s worse on long sweeping bends and better on fast twisty bends?
I had to do a fast overtake on a bend and quick correct as I came back onto my side of the road not so long ago. It felt as if the back end was stepping out when I pulled back in, but now I’m thinking about it, it could have been the lag in the 4ws :?
Chooch
Its still in bits… So no not tried it yet :?
JC